Technical Parameter Dimensions: 510mm Ã? 500mm Ã? 450mm Weight: 30kg Power: 85-132vac/170-264vac 47-63Hz Fuel tank capacity: 4.5L Test tube capacity: 120CC Ultrasonic wave frequency: 25KHz Ultrasonic wave power: 100W Rotate speed: 0-9975r/min, step: 25r/min Pulse width: 0-30ms, step: 0.1ms Count: 0-9975r, step: 25r Time: 0-9975S, step: 5S System pressure: 0-6.2kg/cã?¡ (variable regulatedï¼? System flow: 4L/min Test cylinder: 8 (max) â?¡ã??Specifications & Functions ECCOM Fuel Injector tester & Cleaner mainly apply to fuel injector testing, cleaning and quality analyze. The functions as following: ***** test and analyze the injecting state. ***** test the injector dribbling. ***** test the injecting angle and atomizing. ***** test the injecting volume. ***** test the injector uniformity. ***** test conduct the physical and chemical cleaning of the blocked or trouble injector, ultrasonic cleaning, test cleaning and on-vehicle cleaning. ***** test the open and close injecting pressure of the injector. ***** clean the engine without dismantling (choose matched connector). ***** operate the auto static test, dynamic test and selective test with the injecting dribbling, angles, atomization, uniformity of one or more(1-6) injectors, can simulate any state of the vehicle to observe the complete process of injectors. ***** operate automatically, reversely, and ultrasonic cleaning with one or more injectors at different state, such as high resistor, low resistor, electric voltage and electric current. ***** test by count mode and timing mode, also have backlight, can observe the injectors clearly. ***** use new type injector, just need choose the matched connector and replace the O-ring. ***** adopts to united design of microcomputer skill and intelligent engine, and suppose driving power and specified injecting protection system, ensure to operate the test and clean at any mode such as high resistor, low resistor, electric voltage and electr